1. Oil Service Reset Allows you to reset the service lamps on the instrument cluster. The Service Indicator System is designed to alert the driver when the vehicle is due for a service.

2. EPB, Electronic Parking Brake allows you to perform the service and maintenance of brake systems, including deactivation and activation of the brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on multiple brands of vehicles where electronic brake systems are fitted.

3. BRT, Battery Replacement Lets you to new battery validated, how to clear faults from the dashboard and display.

4. D.P.F, Diesel Particulate Filter Regeneration let you perform the D.P.F cleaning to clear the blockage through continuous burning of the particulates captured in the D.P.F filter. When a D.P.F regeneration cycle is completed, the D.P.F light automatically goes off.

5. TBA/TPS, Throttle Body Alignment Using the throttle position sensors in the throttle body, the ECU learns the full open and full closed positions through various states (idle, part throttle, WOT) known as a Throttle Body Alignment (TBA)

6. SAS, Steering Angle Sensor Calibration let you perform calibration of the Steering Angle Sensor.

7. TPMS, Tire Pressure Monitoring System Programming allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires are rotated.

8. Gear Learning Crankshaft position sensor adaptive learning.

9. CVT This function is used to reset the compensation code and initialize the ECT after a solenoid valve or valve body assembly has been replaced.

10. Injector Coding This function is to reset and match the date after injector is replaced. 11. A/F Adjust Correspondingly change the fuel supply to change the steam production of boiler and maintanin the energy balance in the combustion process. 12. ABS Bleeding ABS brake bleeding to get a firm brake pad after air exhaustion.