Flush Diaphragm Pressure Sensor

· M20x1.5, R1/2, G1/2 · 0bar~1bar...35bar · Flush Diaphragm Used For Industrial Process Control, Gas & Liquid Pressure Measurement, Refrigeration Equipment and Air

The MPM280P Flush Diaphragm Pressure Sensor is connected via male threads and clamps. Pressure ports are G1/2 male, R1/2 male, NPT1/2 male, M20 x 1.5 male, and DN25 clamps with FKM or silicon O-ring seals. The product has an isolated structure and can measure the respective fluid medium.Features • Pressure range: 0bar ~ 0.35bar…350bar • Gauge, Absolute and Sealed gauge • Constant current or Constant voltage power supply for option • Thread connection pressure: 0bar~0.35bar…350bar • Clamp connection pressure: 0bar~0.35bar~35bar • Hygienic structure optional(Ra<0.4μm) • Tnegtive pressure measurement is available, the lowest to around -1barElectrical Performance • Power supply: ≤2.0mA DC • Electrical connection: φ0.5mm Kovar pin or 100mm silicon rubber flexible wires • Common mode voltage output: 50% of input (typ.) • Input impedance: 2.5kΩ~8kΩ • Output impedance: 3.5kΩ~6kΩ • Response (10%~90%): <1ms • Insulation resistor: 100MΩ@100V DC • Overpressure: 2 times FS